(941) 355 4858

(941) 355 4858

kennyhudson@hudsonswelding.com

HUDSON’S WELDING

Master fabricators in the marine tooling field for over 20 years. Our family-owned and operated business takes pride in its craftsmanship and reliability.

The Hudson Eagle

Our hydraulic mold positioning system allows one worker to safely, single-handedly position the mold at any angle or height

Steel Mold Frames

Specializing in steel mold frame fabrication. The steel frame holds boat molds rigid, ensuring a more accurate and consistent result.

Contact Hudson’s Welding to start saving time and money now!

Gallery

36' hull mold steel frame

36' hull mold steel frame

Hydraulic man lift - full up

Hydraulic man lift - full up

Hydraulic man lift - 30 degree angle

Hydraulic man lift - 30 degree angle

Hydraulic man lift - full down

Hydraulic man lift - full down

H.M.P.S. 2500 lbs

H.M.P.S. 2500 lbs

Pipe bends and welds

Pipe bends and welds

51' deck mold steel frame

51' deck mold steel frame

Split hull mold steel frame on an H.M.P.S. 9000

Split hull mold steel frame on an H.M.P.S. 9000

Hull mold steel frame with box truss on an H.M.P.S. 16000 lbs unit.

Hull mold steel frame with box truss on an H.M.P.S. 16000 lbs unit.

Complete mobile service truck

Complete mobile service truck

H.M.P.S. 9000

H.M.P.S. 9000

Shipping out!

Shipping out!

<

>

36' hull mold steel frame

Hudson's welding 36' hull mold steel frame with box truss installed on a H.M.P.S. 16000 lbs unit.
<

>

Hydraulic man lift - full up

Hudson's Welding Hydraulic man lift in the full up position
<

>

Hydraulic man lift - 30 degree angle

Hudson's Welding Hydraulic man lift in the 30 degree angle.
<

>

Hydraulic man lift - full down

Hudson's Welding hydraulic man lift in the full down position.
<

>

H.M.P.S. 2500 lbs

Lounge and console mold installed on a H.M.P.S. 2500 lbs
<

>

Pipe bends and welds

Close up of the pipe bends and welds on a Hudson's Welding 63' deck mold steel frame with a 5' tall truss.
<

>

51' deck mold steel frame

Hudson's Welding 51' deck mold steel frame with a 5' tall truss.
<

>

Split hull mold steel frame on an H.M.P.S. 9000

Hudson's Welding 37' split hull mold steel frame installed on a H.M.P.S. 9000 lbs unit.
<

>

Hull mold steel frame with box truss on an H.M.P.S. 16000 lbs unit.

Hudson's welding 36' hull mold steel frame with box truss installed on a H.M.P.S. 16000 lbs unit.
<

>

Complete mobile service truck

Hudson's Welding's complete mobile service truck.
<

>

H.M.P.S. 9000

H.M.P.S. 9000 going to the paint booth.
<

>

Shipping out!

36' hull mold installed on a H.M.P.S. 16000 lb unit shipping out !!!
<

>

36' hull mold installed on a H.M.P.S. 16000 lb unit ready for shipping.
<

>

36' hull mold installed on a H.M.P.S. 16000 lb. unit
<

>

Hudson's Welding 51' deck mold steel frame with a 5' tall truss.
<

>

38' hull mold installed on a H.M.P.S. 16000 lb unit.
<

>

33' hull mold installed on a H.M.P.S. 9000 lb unit
<

>

26' hull mold installed on a H.M.P.S. 5000 lb unit.
<

>

Deck dolly and part with turning pins. This dolly can pull the part out of the mold and rotate 360 degrees all the way down the line !!!
<

>

Deck dolly with two sets of turning pins. The top pin is for the deck part and dolly, and the bottom pin is for the dolly only.
<

>

Hard top part installed on a H.M.P.S. 2500 lb unit ready for trimming and finishing work!!!
<

>

Hard top part installed on a H.M.P.S. 2500lb unit - nice for rigging when you can put the part where you want it!!!
<

>

Hard top part installed on a H.M.P.S. 2500 lb unit ready to work in comfort! No more overhead cutouts.
<

>

Hard top part installed on a H.M.P.S. 2500 lb unit, ready to rotate!!!
<

>

Hard top part installed on a H.M.P.S. 2500 lb unit, ready to cut the flang off!!!
<

>

63' hull mold steel frame, turn around time 5 to 7 days
<

>

47' hull mold installed on a H.M.P.S. 16000 lb unit
<

>

47' hull mold installed on a H.M.P.S. 16000 lb unit
<

>

47' hull mold installed on a H.M.P.S. 16000 lb unit
<

>

32' hull mold installed on a H.M.P.S. 9000 lb unit. Do you want to spray gel coat upside down? You can now!!!
<

>
<

>
<

>
<

>

38' deck mold installed on a H.M.P.S. 16000 lb unit - nice for rotating the mold upside-down to demold the part!!!
<

>

63' hull mold steel frame.
<

>

63' hull mold steel frame with side gussets.
<

>

38 degree roll-over boat show stand lock down
<

>

49' hull mold installed on a H.M.P.S. 16000 lb unit.
<

>

49' hull mold installed on a H.M.P.S. 16000 lb unit.
<

>

63' deck mold steel frame with axles and a 5' tall truss.
<

>

63' deck mold steel frame with a 5' tall truss.
<

>
<

>

33' hull mold steel frame with a removeable bottom insert, that will be going on a H.M.P.S. 9000 lb unit.
<

>

28' hull mold installed on a H.M.P.S. 9000 lb unit
<

>

50' hull mold steel frame installed on a H.M.P.S. 16000 lb unit
<

>

38 degree roll-over boat show stand for a 25' boat
<

>

38 degree roll-over boat show stand for a 25' boat
<

>
<

>

Lounge and console mold with a breakaway end installed on a H.M.P.S.2500 lbs
<

>
<

>
<

>
<

>

This is a 33 foot hull mold with a Hudson Welding Steel Frame with a box truss.
<

>

This is a Hudson Welding eight roll carousel material rack that can house up to a 72 inch roll.
<

>

Hudson's Welding steel frame on a 46' sail boat hull mold with a box truss.
<

>

We deliver throughout the entire U.S
<

>

This is a side view of the eight roll carousel material rack.
<

>
<

>
<

>

This is a 36 deck mold with a Hudson's Welding Steel Frame with trick bends.
<

>

Another view of the 50 foot hull mold and a 16000 lb system.
<

>

This is a 50 foot hull mold with a Hudson's Welding Steel Frame, with a box truss and a 16000 lb Hudson Eagle Hydraulic Mold Positioning System.
<

>

This is a 63 foot hull mold showing the process of framing a mold and putting on a box truss.
<

>

This is a 63 foot hull mold showing the process of framing a mold and putting on a box truss.
<

>

This is a 63 foot hull mold showing the process of framing a mold and putting on a box truss.
<

>

Boat manufacturing plant utilizing the full potential of the Hydraulic Mold Positioning System.
<

>
<

>

This hull mold has a Hudson Welding Steel Frame and box truss.
<

>

This Hard Top is getting ready to be installed on a 2500 lb Hudson Eagle Hydraulic Mold.
<

>

This mold is a 43 foot hull mold with a Hudson Welding Steel Frame with Box Truss. The box truss keeps the mold from twisting, which results in pre release.
<

>

This is a 33 foot hull mold with a Hudson's Welding Steel Frame and Box Truss, accompanied by a 9000 lb Hudson Eagle Hydraulic Mold Positioning System which enables one man to raise and rotate the mold.
<

>

This is a 38 foot Ring deck with a Hudson's Welding Steel Frame and Flange Truss.
<

>

This is a 36 foot hull mold with a R&L tripod and a Hudson's Welding Frame.
<

>

This is a 51 foot deck mold with a Hudson's Welding Steel Frame and flange truss. The flange truss on this deck mold greatly increases the overall structure strength of the mold.
<

>

28 foot split hull mold with a Hudson's Welding Steel Frame.
<

>
<

>

44 foot sailboat hull liner mold with a Hudson's Steel Frame.
<

>

Hinged two part dash mold with a Hudson's Welding Steel Frame.
<

>

This is a 16 foot dingy mold with a standard tripod and a Hudson's Welding frame.
<

>

World's largest 102' one piece sail boat hull mold with a Hudson's Welding steel frame.